JOYO PXL8 Programmable Guitar Effects Pedal Controller - 8 FX Loop Switcher with True Bypass (Black) | Perfect for Live Performances & Studio Recording

PXL8---PEDAL GROUP CONTROLLER The PXL8 pedal controller keeps your show away from the hustle and bustle PXL8 is a pedal group controller with 8 groups of effect loops that can be programmed and stored. In the past, when we used effect pedal, we usually connected the pedals one by one, and then turned on the pedals one by one. Or turn off the pedal you want to use, so that once the number of pedals increased, the operation becomes cumbersome, Especially in live performances, the original smooth and pleasant music will be greatly reduced due to the wrong effect or the failure to switch the effect in time. When using, just select the previously edited sound combination, You can make your effect system work continuously and stably without too much operation. Even if you turn off the power, the previous settings will not disappear. It can store up to 32 combinations. Internal TRUE BYPASS design minimizes the loss of sound, and avoids the pollution of the guitar signal by some effects that use electronic switches to switch as much as possible. on the other hand, the PXL8 effect controller also has high switching speed and low switching noise. Specification: Packing List: 1 JOYO PXL8 Pedal Controller, 1 User Manual, Not include power supply True Bypass Design--No sound pollution TAKAMISAWA miniature signal relay Power input protection Working voltage: 8-15V DC Full-load working current: 200mA Dimension: 11(L)* 3.2(W) *2.1(H) inch Weight: 1340g OPERATION INSTRUCTIONS 1. Connect your effect pedals to the L1 - L8 FX loop. Connect the SEND jack to the FX pedal's input jack, and connect to RETURN jack to the FX pedal's output jack. 2. Connect your guitar to the PXL8's input jack. 3. Connect the PXL8 from the output to your amplifier's input 4. Connect the PXL8 power supply and also power on all your effects pedals, turn on all the FX pedal connected in the PXL8's FX loop. 5. Power your amplifier on. 6. All the 8 LOOP channel of PXL is set to BYPASS mode and the group status indicator will flash after powered up, this means you have to choose one FX combination to start your sound. 7. Use the A/B/C or D switches to turn on/off the effect group you select. By repeatedly pressing any one of those switches, you bring the unit in and out of bypass modee. NOTE: While in Bypass mode, you can not perform an edit operation. 8. The BANK+ and BANK- switches allow you to toggle between banks. there are eight banks（1-8）available in the PXL8. when any bank is changed, the group will not be switched until one of the A/B/(C/D) buttons is pressed. Note：You can not perform an EDIT operation during bank change until you make a selection of one combination by pressing the A/B/C/D button again. OPERATION INSTRUCTIONS 1. Connect your effect pedals to the L1 - L8 FX loop. Connect the SEND jack to the FX pedal's input jack, and connect to RETURN jack to the FX pedal's output jack. 2. Connect your guitar to the PXL8's input jack. 3. Connect the PXL8 from the output to your amplifier's input 4. Connect the PXL8 power supply and also power on all your effects pedals, turn on all the FX pedal connected in the PXL8's FX loop. 5. Power your amplifier on. 6. All the 8 LOOP channel of PXL is set to BYPASS mode and the group status indicator will flash after powered up, this means you have to choose one FX combination to start your sound. 7. Use the A/B/C or D switches to turn on/off the effect group you select. By repeatedly pressing any one of those switches, you bring the unit in and out of bypass modee. NOTE: While in Bypass mode, you can not perform an edit operation. 8. The BANK+ and BANK- switches allow you to toggle between banks. there are eight banks（1-8）available in the PXL8. when any bank is changed, the group will not be switched until one of the A/B/(C/D) buttons is pressed. Note：You can not perform an EDIT operation during bank change until you make a selection of one combination by pressing the A/B/C/D button again. JOYO DC 9V power supply JOYO DC 9V/12V/18V power supply JP-02 JOYO Bass Guitar Cable 15ft JOYO Pedal Patch Cables Add to Cart Buying Options Add to Cart Add to Cart Customer Reviews 4.6 out of 5 stars 1,473 4.6 out of 5 stars 781 4.7 out of 5 stars 385 4.7 out of 5 stars 385 Price $12.99$12.99 — no data $12.99$12.99 $19.99$19.99 PXL8 Controller Related Accessories ✓ ✓ ✓ ✓