Industrial USB Motion Controller Board - Stable Performance Encoder Interface Driver 8-24V for CNC, 3D Printers & Automation Systems

Feature:1. Can use in DIY, industrial and automation fields such as joint flexible robots, robotic arms, 3D printing, camera gimbals, pan/tilt slides, CNC milling machines, ship models, and car models.2. The supporting USB connection PC terminal can realize motor debugging and complex multi‑axis control, and can realize FOC control for most brushless motors on the market.3. With the use of encoders, it can also achieve arbitrary torsion, speed loop, position loop, current loop, and position control based on trajectory planning.4. ODESC high‑performance brushless drive is based on the open source project ODrive for hardware optimization and enhancement, with stable performance and matching the original firmware of Odriver.5. The driver board supported encoders include incremental encoder, absolute encoder, for Hall sensor, AMT102, AMT103, TLB5012, AS5047.Specification:Item Type: Single Driver ModuleMaterial: PlasticModel: ODESC3.6 single drive (without heat sink)PCB Layers: 4 layersApplicable Voltage: 8-24VCurrent Parameters: 50A continuous/120A peakSupport Encoder: Incremental encoder, absolute encoder, Hall sensor, AMT102, AMT103, TLB5012, AS5047Communication Interface: USB-protocol open source (for PC/ROS/Raspberry Pi), UART (embedded device), PWM (RC remote control), STEP/DIRECTION (PLC), GPIO, CAN, ANALOG INPUTVoltage Protection: Programmable voltage protection to prevent over-discharge of the batteryMovement Modes: Speed mode, torsion mode, current mode, position mode, trajectory mode, etc. Package List:1 x Driver Board1 x Power Resistance1 x XT60 Male1 x USB Data Cable2 x 20AWG Power Resistance Wire